WEATHERCARE Thermalcool

WeathercareThermalCool Seamaster is an important breakthrough in paint manufacturing technology. This is the type of insulation suitable for environments with different temperatures. This type of paint can be used for exterior and interior wall surfaces. Paint is environmentally friendly and does not contain toxic chemicals.

This is an elastomeric paint that is incorporated by the insulating component invented by paint specialists. After painting, it is possible to create an elastic coating with effective insulation properties for all surfaces such as concrete, metal, glass and roofing.

After drying, it forms a semi-glossy surface, which helps to resist the adhesion of dirt, waterproofing, algae growth and mould growth.

USES

The paint is suitable for use in the protection and decoration of previously painted and unpainted exterior surfaces. such as mortar, cement, asbestos, bricks, hard and soft boards, or on properly primed wood surfaces.

PROPERTIES

High heat resistance, Resists the adhesion of dirt on the surface, Against the growth of algae and mould, The temperature is reduced from 5-10oC, Up to 30% energy saving (conserves power from air conditioner and heater), No toxic chemicals and friendly to the environment, Waterproof, Optimal heat insulation, against solar radiation

PHYSICAL PROPERTIES AND CHARACTERISTICS

Ingredients: Copolymer (containing plastic granules)

Color Structure: Titanium Dioxide & Elastic

Solvent: Water

Density (kg / L): 1.12 ± 0.05

Solid Composition: Approximately 40%

Drying time (temperature 27 ± 2oC and relative humidity 80 ± 5%)

Surface dry: ≤ 20 minutes

Hard dry: ≤ 4 hours

Recommended Dry Film Thickness: 200 - 250 microns

Waiting time between 2 coats:> 3 hours

Theoretical coverage: 2.6 - 3.3m2 / liter

Colour: White and light colours

Shade (look at 60o stand): Semi-gloss

Storage: Keep in a dry and cool place

Application temperature: from 5oC - 40oC

Flashpoint: Not applicable

INGREDIENT

Inorganic (50%); Acrylic Polymer (30%); water and glycol solution (15%); other substances (5%).

USER MANUAL

The paint is prepared for immediate use. However, if necessary, a maximum of 20% water may be added to the first coat. In order to have a nice surface, the following layers should not be added with water.

Surfaces must be clean, dry, free from grease, oil, grease, chalk or paint peeling.

Spray the water hard to remove excess paint, dust, dirt, algae or mould.

If the surface should be moss or mouldy, use Seamaster FW103 mildew, rinse, dry before painting.

For unpainted or painted surfaces, one coat of Acryseal finish and one coat of Weathercare Thermalcool should be applied.

Keep out of reach of CHILDREN.

METHOD OF EXECUTION

Use a brush, roller or spray gun