AIDA Colour Guard

AIDA Colour Guard is an excellent quality emulsion paint for exterior walls. With advance technology, the colours last longer than ever before, thus leaving your walls beautiful for a longer period of time. It is high performance and has lasting durability under severe weathering conditions. It has excellent weather resistance, excellent coverage, excellent colour retention, excellent algae and fungus resistance, good adhesion and alkaline resistance. It has low VOC and is APEO and Formaldehyde free product.

Excellent Weather Resistance
Excellent Coverage
Excellent Colour Retention
Excellent Algae & Fungus resistance
Low VOC

USES

Specially formulated for protection and decoration of exterior masonry and renderings, unpainted and previously painted surfaces such as plaster wall, cement, gypsum board, brickwork, hard and soft boards and on appropriately primed wood surfaces.

PHYSICAL PROPERTIES

Vehicle Type : Acrylic emulsion

Pigmentation : Weather resistant pigments, mineral extenders and combined with effective non-mercurial algae and fungi control additives.

Solvent : Water

Density (kg/litre) : 1.20 ~ 1.40

Volume Solid : Approximately 50%

Chemical Resistance : Has limited chemical resistance

VOC Content : < 4 g/Lit

Drying Time at (27 ± 2°C & RH : 80 ± 5%)

: Touch Dry ≤ 20 minutes

: Hard Dry ≤ 1 hour

Dry Film Thickness : 25 ~ 30 microns per coat

Recoating Interval : 2 hours (minimum)

Theoretical Coverage : 10 ~ 12 m²/litre (Actual coverage is dependent on substrate condition)

Colours : Varies. As per colour card

Gloss at (60° head) : N/A

Finish : Matt

Shelf Life : 24 months at 27 ± 2°C in full sealed containers

Storage Condition : Air tight, store in dry and cool condition

Packing : 1 litre, 5 litres & 15 litres

Application Temperature : 5°C to 40°C

DIRECTION FOR USE

Ready for use after thoroughly stirring. However, if thinning is required, not more than 5% of water may be added for the first coat. For best result, thinning is not recommended for the subsequent coats.

APPLICATION METHOD

By brush, roller or spray.