AIDA Interior Wall Sealer

AIDA Interior Wall Sealer is a water based acrylic primer formulated as the basecoat to provide good adhesion for the finishing coat. It has good alkaline, efflorescence resistance and water resistance. It provides a good surface for the painting of subsequent coats. It is odourless, has low VOC and is APEO and Formaldehyde free product.

USES

It is used as a basecoat primer for new and old interior surfaces such as brickwork, plaster, cement, asbestos, etc.

PHYSICAL PROPERTIES

Vehicle Type : Acrylic Emulsion

Pigmentation : Mineral extenders, pigments and additives

Solvent : Water

Density (kg/litre) : 1.30 ~ 1.40

Volume Solid : Approximately 45%

Chemical Resistance : N/A

VOC Content : N/A

Drying Time at (27 ± 2°C & RH : 80 ± 5%)

: Touch Dry ≤ 20 minutes

: Hard Dry ≤ 1 hour

Dry Film Thickness : 15 ~ 25 microns per coat

Recoating Interval : ≥ 2 ~ 3 hours

Theoretical Coverage : 10 ~ 12 m²/litre (Actual coverage is dependent on substrate condition)

Colours : White

Gloss at (60° head) : N/A

Finish : Matt

Shelf Life : 24 months (27 ± 2°C) in full sealed containers

Storage Condition : Air tight, store in dry and cool condition

Packing : 5 litres & 15 litres

Application Temperature : 5°C to 40°C

DIRECTION FOR USE

Ready for use after thoroughly stirring. However, if thinning is required, not more than 5% of water may be added for the first coat. For best result, thinning is not recommended for the subsequent coats.

APPLICATION METHOD

By brush, roller or spray.