AIDA Easy To Clean

AIDA Easy To Clean is an excellent quality emulsion paint that protects your interior walls from stains. Using advance technology, it is easier than ever to clean your walls from household stains, thus leaving your interior walls beautiful for a longer period of time. It has excellent water resistant, excellent algae & fungus resistance and excellent washability. It is odourless, has low VOC and is APEO and Formaldehyde free product.

  • Excellent Washability
  • Excellent Water Resistance
  • Algae & Fungus Resistance
  • APEO free
  • Low VOC

USES

As a specially formulated for protection and decoration of interior masonry and other surfaces such as plaster wall, cement, gypsum board, brickwork, hard and soft boards and on appropriately primed wood surfaces.

PHYSICAL PROPERTIES

Vehicle Type                   : Styrene Acrylic Emulsion

Pigmentation                   : Mineral extenders, pigments and additives

Solvent                          : Water

Density (kg/litre)              : 1.20 ~ 1.40

Volume Solid                   : Approximately 55%

Chemical Resistance         : Has limited chemical resistance

VOC Content                   : < 4 g/Lit

Drying Time at (27 ± 2°C & RH: 80 ± 5%)

Touch Dry     ≤ 30 minutes

                                      Hard Dry       ≤ 1 hour

Dry Film Thickness           : 25 ~ 30 microns per coat

Recoating Interval            : ≥ 3 hours

Theoretical Coverage        : 11 ~ 13 m²/litre

Colours                          : Varies. Refer to colour card

Gloss at (60° head)          : 15 ~ 50%

Finish                             : Sheen Finish

Shelf Life                        : 24 months at 27 ± 2°C in full sealed containers

Storage Condition            : Air tight, store in dry and cool condition

Packing                          : 1 litre, 5 litres & 15 litres

Application Temperature   : 5°C to 40°C

DIRECTION FOR USE

Ready for use after thoroughly stirring. However, if thinning is required, not more than 5% of water may be added for the first coat. For best result, thinning is not recommended for the subsequent coats.

APPLICATION METHOD

By brush, roller or spray.