ACRYSEAL Water Based Wall Sealer Exterior

Acryseal Water Based Wall Sealer Exterior is a water-based, water-based primer that is especially resistant to alkalis, mildew and waterproofing for exterior surfaces. The paint is used to primer the old and new exterior surfaces such as brick, mortar, cement, asbestos.


The paint is suitable for the protection and decoration of previously painted and unpainted exterior surfaces. such as mortar, cement, asbestos, bricks, hard and soft boards, or on properly primed wood surfaces.


Waterproofing, High permeability, Cover the small cracks, High adhesion for finishing, Anti-mould.



Ingredients: Acrylic Water Supplement

Colour Structure: Mainly Titanium Dioxide and inorganic base colours

Solvent: Water

Density (kg / liter): 1.09 ~ 1.15

Solid Composition: About 32%

Drying time (temperature 27 ± 2oC and relative humidity 80 ± 5%))

  • Surface dry: ≤ 20 minutes
  • Hard dry: ≤ 1 hour

Recommended dry film thickness: 25 - 30 microns

Waiting time between 2 coats: ≥ 3 hours

Theoretical coverage: 10.6 - 12.8 m2 / liter

Shade (look at 85o stand): Shadow

Colour: White

Storage: Keep in a dry and cool place

Application temperature: from 5oC - 40oC


Inorganic (20%); Acrylic Polymer (50%); Water and glycol solution (25%); other substances (5%).


The paint is prepared for immediate use. It is best not to add water.

The surface should be clean, no oil, grease, impurities.

Spray the water hard to remove excess paint, dust, dirt, algae or mould

Keep out of reach of children.


Use a brush, roller or spray gun.