WEATHERCARE Supreme

Weathercare Supreme is a high-performance architectural coating. It is a superior quality, 100% acrylic based emulsion paint specially formulated to provide excellent resistant to algae, fungus, alkaline and carbonation. Its excellent properties thus give exterior walls maximum protection under extreme weathering conditions and last up to 10 years.

USES

It is specially formulated for protection and decoration of external masonry and renderings, unpainted and previously painted surfaces such as plaster wall, cement, gypsum board, brickwork, hard and soft boards and on appropriately primed wood surfaces.

PROPERTIES

Excellent anti-fungus and anti-algae formula, Excellent anti-carbonation formula, Excellent adhesion and durability, Excellent washability, Dirt pick – up resistance, Semi-gloss finish, Alkaline resistance, Excellent colour fastness, Smooth finish, 6 years product warranty, Easy application

PHYSICAL PROPERTIES

Vehicle Type: Acrylic Emulsion

Pigmentation: Weather resistant pigment and mineral extenders, combined with effective non-mercurial fungi control additives.

Solvent: Water

Density (Kg/Litre): 1.20 - 1.35

Volume Solid: Approximately 40%

Drying Time at (27± 2^oC & RH 80 ± 5%): Surface dry:: ≤ 20mins

Hard dry: ≤ 1hr

Recommended Dry Film Thickness: 30 - 35 microns

Recoating Interval: 3hrs

Theoretical coverage: 11 - 14m2 / liter

Colour: Refer to Weathercare Excel ColourPalette Fandeck and Colour Palette Fandeck

Shade (look at 60o stand): Semi-gloss

Storage: Keep in a dry and cool place

Application temperature: from 5oC - 40oC

Flashpoint: Not applicable

Pot Life: Not applicable

COMPONENTS

Inorganic (30% ); Acrylic Polymer (50%); Water ( 15%); other ( 5%).

DIRECTION FOR USE

This paint is supplied ready for use. If thinning is necessary for the 1^st coat, any percentage less than 20% of water may be added. For the best result, thinning is not recommended for the subsequent coats.

1. Surfaces to be painted must be clean, dry and free of all loose particles, chalk, grease or flaking paint.

2. Remove any loose paint film, dirt, algae or fungus by high-pressure water jet.

3. Surfaces that are affected by algae and fungus growth, Seamaster FW 103 fungicidal wash is recommended for washing and let dry.

4. For both new and previously painted surface, apply one coat of Acryseal External and two coats of Weathercare Excel.

5. Keep away from children.

APPLICATION METHOD

By brush, roller or spray.