Seamaster CT88 is acrylic modified cementitious waterproofing compound that requires only on-site mixing to form an ideal product for waterproofing and resurface concrete, masonry and other construction materials. easy to apply, non-toxic, good adhesion and provides a seamless waterproofing layer for concrete.
Waterproofing lining, water tank, swimming pool, wall, floor, Bathroom, wet areas and planter box
Reface concrete surfaces
The substrate surfaces shall be free of fungus, algae, loose materials, oil and grease, dirt as well as other contaminants. Before applying, all surfaces must be thoroughly cleaned
Density (kg/ litre) : 1,29 ± 0,10
Theoretical Coverage : About 2m² per kg( two coats) depending on substrate conditions
Toxicity : No-toxic
Mix ratio : CT88: Cement : Water = 1:1:0.5 (by weight)
Drying time (at 30 °C) : Surface dry 1 hour
: Hard dry 2 hours
Recoating Interval : Approximate 6 hours
Pot life : Approximate 60 mins at 30ºC
Packing : 1Kg, 4Kgs, 20Kgs
Normal room temperature under the shade, avoid exposure from direct sunlight
By roller, brush or trowel
According mixing ratio mixing cement with water well by mechanical stirrer, after that in stir condition add CT88 into mixture( CT88 stir well before using), continue stir until the material is thoroughly mixed well. It is ready for using.
Discover trends in decor and ideas in our new monthly newsletter
Copyright © 2018 Sơn Seamaster Malaysia.
