EPOXY FINISH

Epoxy Finish is a high gloss, high performance two pack epoxy enamel designed for airless spray application for exterior or interior use. It can also be used as a floor or wall coating system over concrete or blasted steel and as a sealer for concrete and masonry under high build epoxy systems.

USES

Stir well before use, add water and stir well if necessary

PROPERTIES

Hard, tough and abrasion resistance, Protect against fumes and spillage of mild acids. alkalis, salts and solvents, Available in non-slip type, Available in a range of colours, For interior and exterior use.

PHYSICAL PROPERTIES

Vehicle Type: Epoxy

Pigmentation: Selected chemical and weather resistance types

Mixing Ratio: Base

Solvent: S4003

Density (kg / liter): 1.38 ± 0.05

Volume Solid: 58%

Drying time (temperature 27 ± 2oC and relative humidity 80 ± 5%))

Touch dry: ≤ 1/2 hours
Hard dry: ≤ 16 hours

Recommended dry film thickness: 50 microns

Recommended wet film thickness: 85 microns

Waiting time between 2 coats: ≥ 2hours

Theoretical coverage: 11.7m2 /litre

Gloss (at 60-degree head): Gloss

Colour: Refer to the standard palette or RAL colour

Storage: Keep in a dry and cool place

Application temperature: from 5oC - 40oC

INGREDIENT

Inorganic (20%), Alkyd resins (50%), Solvents (25%), and others.

USER MANUAL

It can also be used as a floor or wall coating system over concrete or blasted steel and as a sealer for concrete and masonry under high build epoxy systems.

METHOD OF EXECUTION

By rubbing, rubbing or spraying