Weathercare Waterproofing is a high quality, flexible, algae and mould resistant paint that retains high colour fastness in harsh climates. The paint has a water-based acrylic base with strong bonds between the components to help seal and cover minor cracks. The paint is flexible, resistant to the adhesion of the surface, anti-cracking and anti-CO2 effects.
The paint is suitable for the protection and decoration of previously painted and unpainted exterior surfaces, such as mortar, cement, asbestos, bricks, hard and soft boards or on wooden surfaces. suitable primer.
Anti-dust, Chemical resistance and alkalinity, Prevent cracking and cover small cracks, Excellent waterproofing, Prevent carbonation, Low water absorption, Contains no toxic substances & flammable substances, High elasticity, Moisture can be prevented on walls and roofs due to the possibility of evaporation, Anti-ultraviolet, High adhesion, Anti-algae, good mould.
Colour structure: Weather-resistant, inorganic colourants in combination with algae and mould inhibitors.
Density (kg / liter): 1.25 - 1.40
Solid Composition: Approximately 45%
Drying time (temperature 27 ± 2oC and relative humidity 80 ± 5%))
Surface dry: ≤ 1 hour
Dry hard: ≤ 2 hours
Dry Film Thickness Recommended: 80 -100 microns
Waiting Time Between Coverage: 6 hours
Theoretical coverage: 6.3 - 6.75 m2 / liter
Shade (look at 85o stand): Semi glossy 15 - 40%
Colour: Refer to palette Fandeck /colour BS5252
Storage: Keep in a dry and cool place
Application temperature: from 5oC - 40oC
Inorganic (30%); Acrylic Polymer (50%); Water and glycol solution (15%); other substances (5%).
The paint is prepared for immediate use. However, if necessary, a maximum of 20% water may be added to the first coat. In order to have a nice surface, the following layers should not be added with water.
1. The surface to be painted should be clean, dry, free of grease, impurities, chalk or paint film peeling.
2. Spray high pressure to remove excess paint, dust, dirt, algae or mould.
3. If the surface needs moss or mildew, apply Seamaster FW103 mildew, rinse, dry before painting.
4. For unpainted or painted surfaces, one coat of Acryseal exterior paints and one coat of Weathercare Waterproofing should be applied.
Keep out of reach of children.
METHODS OF EXECUTION
Use a brush, roller or spray gun
Copyright © 2018 Seamaster Paint Malaysia.