Higlos Anti Crack is a premium grade water-based paints formulated with a special formula for smooth, glossy finishes used in interior decoration. Surface is painted very easy to scrub, resistant to abrasion and adhesion on the surface.
For interior, wall and ceiling such as mortar wall, soft board, fiberboard and plaster.
High gloss, Cover the small cracks on the surface, Good colour fastness, Anti-dust, Easy to apply and cover the defects of the surface, Easy to clear, Surface smooth, Anti-mould, Good adhesion and high strength
Ingredients: Original Acrylic
Colour structure: Colorless substances
Density (kg / L): 1.20 ± 0.05
Solid Composition: Approximately 40%
Drying time (temperature 27 ± 2oC and relative humidity 80 ± 5%)
Surface dry: ≤ 30 minutes
Dry hard: ≤ 2 hours
Dry Film Thickness Recommended: 30 -35 micron
Waiting time between coatings: 3 hours
Theoretical coverage: 11 - 13 m2 / liter
Colour: Refer to Higlos / Pearlsilk Anti-Crack palette
Shade (look at 60o vertical): Shadow ≥ 70%
Storage: Keep in a dry and cool place
Application temperature: from 5oC - 40oC
Lead, chromium, mercury components: None
Inorganic (30%); Acrylic Polymer (50%); Water and glycol solution (15%); other substances (5%).
The paint is prepared for immediate use. However, if necessary, a maximum of 20% water may be added to the first coat. In order to have a nice surface, the following layers should not be added with water.
The surface to be painted must be clean, dry, free of grease, impurities, chalk or paint film peeling.
Remove excess paint, dust, dirt, algae or mould
For unpainted or painted surfaces, one coat of Acryseal interior primer and two coat of Higlos Anti-Crack paint are required.
Keep out of reach of CHILDREN
METHOD OF EXECUTION
Use a brush, roller or spray gun.
Copyright © 2018 Seamaster Paint Malaysia.