Home page
Primer
ACRYSEAL Water Based Wall Sealer Interior

ACRYSEAL Water Based Wall Sealer Interior

Acryseal Water Based Wall Sealer Interior is a water-based acrylic primer sealer, specially formulated to withstand alkali attack, efflorescence disruption. It is used as a primer for new and old building surfaces such as brickwork, plaster, cement, asbestos and etc.

USES

For walls and ceilings such as plastered walls, soft board, fibre boards & gypsum board.

PROPERTIES

Water resistance, High permeability, Cover the small cracks, High adhesion for finishing, Anti-mould, Provide good adhesion for finishing coat, Fungus resistance, Good penetrate power.

PHYSICAL PROPERTIES

Ingredients: Acrylic Water Supplement

Colour Structure: Mainly Titanium Dioxide and mineral extenders

Solvent: Water

Density (kg / liter): 1.00 – 1.30 ( depends on colour)

Solid Composition: About 32%

Drying time (temperature 27 ± 2oC and relative humidity 80 ± 5%))

Touch dry: ≤ 20 minutes
Hard dry: ≤ 2 hour

Recommended dry film thickness: 25 - 30 microns

Waiting time between 2 coats: ≥ 3 hours

Theoretical coverage: 10.6– 12.8 m²per litre

Gloss (at 85^o head): Sheen

Colour: White

Storage: Keep in a dry and cool place

Application temperature: from 5oC - 40oC

INGREDIENT

Inorganic (20%); Acrylic Polymer (50%); Water and glycol solution (25%); other substances (5%).

USER MANUAL

The paint is prepared for immediate use. It is best not to add water.

The surface should be clean, no oil, grease, impurities.

Spray the water hard to remove excess paint, dust, dirt, algae or mould

Keep out of reach of children.

METHOD OF EXECUTION

Use a brush, roller or spray gun.